Agricultural Electric Mist Thermal Pulse Jet Fogger Fogging Atomizer Sprayer Machine

• After-sales Service: One Year
• Warranty: One Year
• Installation: External Thread Connection
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Sprayer Mist Fogger Machine
• Liquid Contained: Disinfector
• Spraying Shape: Liquid Column
• Volume: >500ml
• Power Supply: Electric
• Technics: Bottle Blowing
• Material: PE
• Type: Sprayer Parts
• Power: Gasoline Oil
• Packing: Carton
• Log: Customized
• Application: Agriculture Daily Disinfection
• Transport Package: Wooden Packing
• Specification: 108.5*25.5*30.8cm
• Trademark: USE WELL
• Origin: China
• Package Size: 170.00cm * 56.00cm * 86.00cm
• Package Gross Weight: 15.000kg

Product Description

Product Description

Agricultural Single tube Electric Mist Thermal Pulse Jet Fogger Fogging Atomizer Sprayer Machine

   The sprayer is a kind of agricultural machinery that disperses liquid, and it is a kind of agricultural pesticide application machinery. The plant protection machinery in agricultural machinery belongs to portable agricultural machinery. It is also called high stem crop sprayer or field bath sprayer. Sprayer [suitable for pest control in forests, nurseries, orchards, tea gardens, cotton, wheat, rice, corn and other field crops and large-scale pastures, garden flowers and trees in cities and suburbs, vegetable gardens, and plants in greenhouses. Prevention and treatment.
   The smaller the particle size of the smoke, the more the number of fog particles. Experiments have shown that the more fog particles per unit area, the better the control effect. A large number of mist particles diffuse in the space and distribute evenly, which greatly increases the chance of contact with germs and pests, and is beneficial to improve the control effect. The smoke particles are small and have multi-directional deposition characteristics. It is beneficial for the fog particles to deposit on the front and back of the branches and leaves and in all directions of the insect body. The deposition rate is higher on small targets, such as insect antennae and hairs. This is the effect of pest control. One of the good reasons.

Product Parameters

 

Model:	TS35A
Weight Empty	8KG
Size	1080x270x350mm
Capacity of Fuel Tank	2L
Capacity of Solution Tank	7L
Cubic Capacity of engine	48cc
Fuel Consuption	2.5 L/h
Automatic Igniton	Electronic

Power supply	Li battery
Starting Method	Push Button / Manuel
Flow Rate	L/min:1
Droplet Size Spectrums	50um
Size of Carton	1090x270x360mm
Frame Material	304 Stainless Steel
Exploding Pipe material	316 Stainless Steel:Exploding Pipe Type:60-28

 Common failures and troubleshooting methods
 Difficult to start-up
1, lgnition needle does not work or high voltage coil is damagedWhen the machine is difficult to start, check the test power first, to checkwhether there is squeak sound when the needle works. lf there is no sound, itmeans that the ignition needle or high voltage coil is damaged. in this case.remove the cap on the carburetor first, and then remove the ignition needle withthe sleeve, check whether there is carbon deposition on the ignition needle.When carbon deposiion is found, grind it with sand paper. After grindingfinished, reload needle to the machine, and check the test power again. If theignition needle still does not work, check the battery condition, cables and highvoltage package. Before the high voltage coil is checked, remove the cap, placethe high voltage cable at a distance of 2mm away from the machine to test thepower and high voltage package. lf it is not ignited, check if the cable is loose orfall off. lf the cable is not loosed or fall off, replace high voltage coil. lf the ignitionis weak, it shows the electricity is insufficient, please charge the battery.2, The diaphragm damage of carburetorAfter a long time operation, if the machine is not easy to start, please checkthe carburetor diaphragm. Remove the plastic protective cover and thecarburetor screws, take out the diaphragm assembly and check the diaphragm.If it is damaged, please change it.
Note: when the diaphragm is changed, don't put it into wrong position.
Remember the order when you demolish it, and install it in reverse order.

Work principle

IIl. Composition and working principle
1, The machine is mainly composed of four parts: water circuit, electrical circuit,gas circuit and fuel circuit, including carburetor, engine and explosion tube, frame.fuel tank, pesticide tank and pipeline.2, Working principle:
Fogging machine uses gasoline as fuel, when it is started, the high temperatureand high pressure's gas flow at high speed generated by the engine sprays fromthe pulse nozzle. When the pesticide valves is opened, the pressure in thepesticide tank presses the drug into the pipe to meet the high temperature andhigh speed flow. At the moment of meeting, the drug solution is atomized intosmoke and jetted out from the nozzle, and quickly spread and diffuse. When theobject is exposed to the mist or smoke, it will be killed.

Delivery picture 

 

Customer Feedback

 

Company Profile

 

1. Our factory has more than 10 years production experience with ourself design and development technical team .
2.We have ISO-9001 , CCC, CE, IAF ect certification.
3. We can supply factory direct price for all Distribution and Retailers.
4. Timely and efficient customer service .
5. Well testing facilities & strong technical force.
6. "Advanced Business Unit" by the local Municipality.
7. More than 6 years export experience for all over the world. Our customer from: Amercia,Italy,France,Australia,Germany,England,Egypt,Indonesia,Kuwait,India,Mexico,Singapore,Russia,Botswana,Turkey,Peru,Chile,Colombia,Uganda,Yemen,Ecuador,Nigeria,Tanzania ,Jamaica,Cambodia,United Arab Emirates and other African countries. Adhering to the principle of quality first and customer satisfaction is the service tenet we have been adhering to.

FAQ